A dimpled damp proofing membrane for use after chemical DPC injection or following flood damage. The dimpled membrane has a welded mesh face for direct & immediate application of plaster finishes within the drying out period.
This vertical damp proofing membrane is manufactured from robust high density polyethylene with 3mm studs to create continuous ventilation channels. 1.56 Litres of space per m2 of tanking membrane permits ample air circulation, allowing underlying substrate to drain and breath. Tough HDPE mesh surface permits direct application of various plaster finishes or adhesive dabs for plasterboard.
BS 8102: 1990 - Type C compliant - waterproofing below ground - Grade 3 or 4 dry environment
Load bearing capacity: 300kN/ m2
Drainage\ventilation capacity: 1.56 l/m2
For each 15m2 of this Damp-Proofing Membrane you will need:
A bag of 200 plaster plugs with ready-mounted waterproof seals and, if joining strips, a roll of Fibre Tape
"Damp-Proofing Membrane" buyers were also interested in...
|
|
|
|
|
£108.00£91.50
You save £16.50Valid until 10/02/2012
|
|
|
.jpg "Show more information on Baseline Mesh Membrane Kit")
.jpg "Show more information on Damp Proof Cream - Dampcure 1000 Kit")
.jpg "Show more information on DIY Damp Proofing Cream - 380 DPC Kit")
.jpg "Show more information on DPC Injection Cream - Damp Cure 6000 Kit")
