Twistfix

Damp-Proofing Membrane

Damp-Proofing Membrane
Product code DAMP-MEMBRANE
  • RRP £141.60
  • £129.60
(212 items in stock)

A heavy duty dimpled damp proofing membrane for use after chemical DPC injection or following flood damage. The dimpled membrane has a welded mesh face for direct & immediate application of plaster finishes within the drying out period.

This vertical damp proofing membrane is manufactured from robust high density polyethylene with 3mm studs to create continuous ventilation channels. 1.56 Litres of space per m2 of tanking membrane permits ample air circulation, allowing underlying substrate to drain and breath. Tough HDPE mesh surface permits direct application of various plaster finishes or adhesive dabs for plas­terboard.

BS 8102: 1990 – Type C compliant – wa­ter­pro­ofing below ground - Grade 3 or 4 dry environment

Load bearing capacity: 300kN/ m2

Drainage\­ventilation capacity: 1.56 l/m2

For each 15m2 of this Damp-Proofing Membrane you will need:

A bag of 200 plaster plugs with ready-mounted waterproof seals and, if joining strips, a roll of Fibre Tape.

There are no reviews yet.

Write a review

    Overall satisfaction
    Quality
    Value for money
    Performance
    Ease of use
4 items
Sort

Damp Check – Mesh Membrane Kit

Damp Check Kit provides an effective moisture barrier when isolating damp walls from internal finishes. The air gap behind the damp-proof membrane allows walls to breathe and water to drain. 10m Kit

Damp Treatment – All Cure Total

A universal damp treatment kit for treating damp walls above ground level. This 3 in 1 damp treatment system will stop rising-damp block penetrating damp and combat con­den­sati­on. Options for 5m and 10m of wall.
Rating 4.9 of 5

Tanking Membrane 20m

A cost effective polyp­ro­pyle­ne tanking membrane with 2mm studs formed on one face of the product and a mesh welded to the other side. Available at a special trade price in a 1m x 20m or 2m x 20m roll
Rating 5.0 of 5

Baseline Mesh Membrane Kit

Mesh membrane kit in 3 sizes with everything needed for waterpro­ofi­ng wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plas­ter­board.
Rating 5.0 of 5