Retrofit bed joint reinforcement pack containing 6mm x 7m stainless steel helical bars. The 6mm reinforcing bar is the standard size rod used for most masonry repair applications. Pack of 5

5mm-9mm Diameters- 10 Pk
Twistfix brick reinforcement stitching bars are used to reinforce and strengthen fractured brick and masonry walls. Reinforcing bars are 1m long.

Structural repair ties are extra long 12mm diameter drive-in helical wall ties that reinforce vulnerable masonry walls. Lengths 1070 (42"), 1220 (48") and 1370mm (54") - 10Pk

Helical tie bars for connecting multiple layers of brick or stone when reinforcing the separating leaves of a solid wall without the need for special grouts or mortars. Packed in lots of 50

Lightweight reinforcing wires. 5mm x 7m stainless steel helical reinforcement wire is ideal for use in existing buildings with narrow mortar joints having a height as little as 7mm. Pack of 5

These heavy duty helical bars are ideal for bed-joint reinforcement applications for use where additional sheer strength is needed. Pack of 5

Retrofit Wall Connectors are long-series, 12mm diameter spiral wall ties that are driven deep into masonry to form a mechanical connection that needs no cement, grout or resin. Available 610, 760 and 910mm - 10Pk

This removable ground screw is hammered into the soil to form a firm anchorage point. Complete with angled bracket for tie-down applications. Available in 40mm and 50mm diameter and a selection of lengths

These 6mm Crack stitching bars for masonry repairs and reinforcement of cracks in walls. High tensile (circa 8kN) helical bars for repairing a cracked wall permanently - Pack of 10

Super-7 helical rebar for retrospective reinforcement of masonry structures. The 7mm diameter spiral bar has greater sheer strength than the standard 6mm version. Pack of 5

These reinforcing steel rods are the strongest helical bars available. They are idea for use in strengthen cracked walls in old barns, stone churches and retaining walls. Pack of 5

Reinforcing bars for structural brick stitching repairs. High tensile helical rebar is manufactured from corrosion resistant stainless steel. The reinforcement stitches cracks in brick walls. 480 x 1m lengths