Damp Proof Cream - 4 x 1LTR - BBA
Damp proofing injection treatment stops rising damp in brick masonry walls. Inject Damp-Cure cream along the mortar bed to form a continuous chemical damp proof course to stop rising damp.
Drill a series of 12mm holes, 90% though the wall at 100-120mm centres along the designated bed joint. Inject enough cream to fill the hole to within 1cm of wall surface and leave it to migrate through the wall and cure to form a chemical damp proof course. Make good with sand and cement whist cream is in the hole or with mastic if filling after diffusion
Dampcure 4 x 1L has been independentley tested and has a full BBA approval.
Damp-Cure 1000 is packed in a special 1L cartridge
Consumption rate – 115mm wall* 10m per cartridge of damp injection cream
Consumption rate – 230mm wall* 5m per cartridge of damp-proofing cream
*Approximation only – allows 5-10% injection cream wastage
Solid walls can be drilled and injected from the most convenient side. The inner and outer skins of a cavity wall should be treated independently of each other, drilling and injecting the both sides of the wall to form a chemical DPC in each. Renew damp plaster to complete the damp proofing treatment
One plastic extension injection nozzle is included with each order. To use the 1000ml cartridge you will need a special large series caulking gun.
There are no reviews yet.