DPC cream in 380ml cartridges. Without the need of any specialist equipment the DPC cream will provide an effective barrier against rising damp in walls. The twelve cartridges will treat 22.8 lm of double leaf brickwork.

Damp Proofing Cream sold as a 3 x 380ml pack for the treatment of rising damp. Using a standard caulking gun to inject the cream into the wall the cream will provide an effective barrier against rising damp in walls.

Mould remover kit has everything you need to kill mould growth and mildew.

Rising damp kit comprising 3 litres of DPC injection cream and 5 litres of plastering additive. This kit has everything needed to treat rising damp along 30m of single leaf wall or 15m for 9" walls

Damp Check Kit provides an effective moisture barrier when isolating damp walls from internal finishes. The air gap behind the damp-proof membrane allows walls to breathe and water to drain. 10m Kit

Mesh-faced membrane with 3mm studs and a polypropylene mesh to provide a key for plaster, render or plasterboard dry lining on plaster dabs. Roll sizes: 10m2, 20m2 and 40m2

CM8 is a versatile 8mm high tanking membrane for use in waterproofing damp proofing applications above and below ground level. Options: Rolls of 40m2 and 48m2

CM8-Mesh Membrane withf 8mm studs and polypropylene mesh key for direct application of plaster, render or adhesive dabs for plasterboard dry lining. Rolls sizes: 20m2 and 40m2

Waterproofing membrane kit with everything needed for waterproofing. Sizings 2 x 20m or 2 x 2.4m of floor or wall. Fix studs to basement membrane plugs for dry-lining walls. Lay screed direct.

Mesh membrane kit in 3 sizes with everything needed for waterproofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plasterboard. 2.20m or 2.10m sizings

Wykamol CM20 drainage membrane with 20mm studs. It has been developed for use in waterproofing basement and cellar floors. Options 20m2 and 40m2

Wykamol CM 20 mm Hi-Viz cavity drain membrane for waterproofing basement floors. 40 sqm high-visibility yellow tanking membranes are in stock and sold in at trade prices. 2 x 20 m.

Basement membrane for tanking walls and floors in basement waterproofing schemes. Cavity drain membranes are available in 40m2 and 48m2 rolls for cost effective basement waterproofing. Multi-Pack: 6 rolls. Sizings: 2 x 20m or 2 x 2.4m.

Wykamol CM3 damp proofing membrane with 3mm studs; ideal for the isolation of internal surfaces from damp walls and floors. Roll Size: 2m x 20m (40m2)

General-purpose, quick drying damp proof paint that dries to form a water-proof membrane. An effective penetrating damp treatment for waterproofing wall surfaces. 5L

Lectros electro osmotic damp proof system. A scientifically proven rising damp treatment using osmosis. Ideal damp treatment for thick brickwork and rubble-filled stone walls.

Easy to use DIY damp proofing kit. Includes everything you need to provide an effective damp proof course in walls. This kit treats up to 30m of single leaf walls or 15m of double leaf brickwork.

Water repellent surface treatment for wall suffering from penetrating damp. Prevents moisture migrating through masonry walls and brickwork facades. Costs much less than weather resistant render products. 5 Litres

A universal damp treatment kit for treating damp walls above ground level. This 3 in 1 damp treatment system will stop rising-damp block penetrating damp and combat condensation. The product will cover 10m of wall.

Dry Seal masonry water repellent is a high strength silane cream treatment that waterproofs brick and stone facades including walls, bridges and tunnels. 3kg Tub

Damp proof cream kit for Builders. This 8Litre DPC injection pack contains the products needed to provide a chemical DPC to stop rising damp in walls. This kit treats up to40m of double leaf / cavity wall

Water repellent surface treatment for protection against penetrating damp. Prevents water migrating through brick and masonry façade walls. Costs much less than storm-proof render products. 25L

Fungicidal paint additive for anti-condensation paint. Black mould prevention at a fraction of the cost of a specialised fungicidal paint.

Ultracure DPC cream in 6 x 380ml cartridges. Treat damp walls with advanced chemical damp proof course products. No specialist equipment needed. Simple DPC injection treatment using caulking gun.