A warm roofing guide tool with double-ledge gutter. Squares & aligns Super-7 warm roof fixings vertically upon counter batten widths of 37 & 50mm to guard against deficiencies in-skew fixing.

High-thrust pointing and grouting gun with trigger mechanism for smooth application

Professional heavy duty, 2-piston resin dispenser gun for use with co-axial 380ml resin cartridges.

Extra large heavy duty DPC injectiongun for rising damp treatment using Ultracure chemical damp proofing cream supplied in 1000ml cartridges

Two piston epoxy resin injection gun for side by side cartridges. Generates high pressure for extrusion of resin components

Pinning nozzle and collet set for masonry repairs. Fits mortar injection gun to facilitate repairs of wall cracks. Use to install helical bars for brick stitching by tying separating cross walls

Crack stitch repair grouting tool for rapid injection of thixotropic mortars. Superb for repairing masonry wall cracks with helical bars and grout. Useful for pointing walls and patios at high speed.

This SDS drive adapter is only for fixing Thor Helical CD remedial wall ties. The patented tool spins around the tie’s shank. It delivers repetitive hammer blows for high-speed installation.

SDS adapter for fixing 5mm helical wall ties during the construction of timber frame houses. Insert the tie into the tool and hammer 35mm into timber stud using the hammer-only action

SDS adapter for fixing 7mm helical wall ties into thin joint blockwork. Set drill to hammer action only, insert tie into tool and hammer the tie 85mm into Thermalite, Celcon or Durox blocks.

SDS adapter for fastening 12mm diameter retro-fit wall connectors. The innovative tool design allows it to spin around the red end of the connecting device to deliver a repetitive impacts rapid installation

The setting tool is used in conjunction with REM ties. The tool is located over the brass ‘torque’ nut and tightened for the product to work correctly.

SDS drill adapter for lateral restraint ties used to wind elongate remedial wall ties into parallel joists to connect a brick or masonry wall to structural timbers.

SDS drill adapter for fixing Insofast 18A drywall fasteners. Dome head delivers repetitive hammer blows to dished head plasterboard nails for high speed installation

Plasterboard fixing tool set comprising a chuck collar and SDS punch. The collar is designed to fit a standard 43mm SDS chuck. The collar is adjustable to set the countersink depth of the punch

SDS drill adapter for fixing Insofast 18 and Insofast 35 fixings. Dished head delivers repetitive hammer blows to dome headed insulation nails for fast, easy installation

SDS setting tool used for fixing Thin Joint Cavity Wall Ties into Thermalite, Celcon or Durox Aircrete masonry. Cut long tubular tie-support bit to required length

A professional chemical spray unit comprising a 7L tank and an adjustable brass spray lance. Ideal for spraying timber treatments, garden herbicides, patio sealers and other chemicals

Superior SDS drill bits for professional hammer drilling machines. Includes long-series carbide masonry bits for the installation of remedial wall ties to tie cavity walls

These long-series SDS drill bits are ideal for drilling deep into masonry concrete and brick walls. Available in lengths of up to 1 metre, the effective working length of an SDS drill bit is typically 60mm less than it's overall length

A wall tie testing kit comprising a tension tester and a test key for checking pull out loads on helical ties. Use it for quality control, pre-specification assessment or in laboratory product approval tests