Plasterboard fixing tool set comprising a chuck collar and SDS punch. The collar is designed to fit a standard 43mm SDS chuck. The collar is adjustable to set the countersink depth of the punch
- RRP £57.60
SDS adapter for fixing 5mm helical wall ties during the construction of timber frame houses. Insert the tie into the tool and hammer 35mm into timber stud using the hammer-only action
- RRP £30.30
SDS adapter for fixing 7mm helical wall ties into thin joint blockwork. Set drill to hammer action only, insert tie into tool and hammer the tie 85mm into Thermalite, Celcon or Durox blocks.
- RRP £30.90
SDS adapter for fastening 12mm diameter retro-fit wall connectors. The innovative tool design allows it to spin around the red end of the connecting device to deliver a repetitive impacts rapid installation
- RRP £48.90
SDS drill adapter for lateral restraint ties used to wind elongate remedial wall ties into parallel joists to connect a brick or masonry wall to structural timbers.
- RRP £71.40
SDS drill adapter for setting Insofast-60 insulation fasteners. Fits within the thermal break fastener head to deliver repetitive hammer fix installation at high speed
- RRP £25.50
SDS adapter for driving 7mm twist-nails in timber stud to masonry applications. The tool uses the impacts of an SDS drill to deliver a series of impacts to the fastener, fixing studs to brickwork at high speed
- RRP £18.90
SDS setting tool used for fixing Thin Joint Cavity Wall Ties into Thermalite, Celcon or Durox Aircrete masonry. Cut long tubular tie-support bit to required length
- RRP £63.00