Hammer-in fixing for use with Baseline Mesh waterproofing membrane. Keyed surface to receive direct application of wall plaster or plasterboard on adhesive dabs. - Box Quantity: 200

Hammer-in fixing with waterproof seal for use with Baseline 8 & Thermseal waterproofing membranes. Screw wall studs directly into aperture located in plug head. Quantity: Box of 200

Helical twist nails fix timber battens to masonry. The fixing corkscrews through timber and self-taps into masonry to deliver a cost effective method of battening out for dry-lining - Packs of 100 with FREE SDS tool

Helical warm roof nails in galvanised steel. For fixing Kingspan 6mm ply-faced insulation boards to joists or rafters. Hammer in fixings for flat warm roof applications with boards 40-185mm deep - 20 Bag or 400 Box

Metal insulation fixings for anchoring Rockwool & Knauff fireproof insulation panels to masonry walls & concrete soffits. Corrosion resistant Stainless Steel Rendalath fixing - Pack sizes 20 & 400

Insulation fasteners for fixing ply-faced Celotex or Kingspan decking boards. Hammer in fixings for flat warm roof deck insulation upto 210mm deep. Rust resistant Stainless Steel - 20 Pk or 400 Box

Fixings for securing insulated plasterboard sheets to brick and block walls. Fire proof fasteners with galvanized coating for internal solid wall insulation in packs of 20 or boxes of 400

Superior warm roof nails for fixing Kingspan or Celotex insulation between counter-batten & rafter. Powerful Super-7 fixings reduce warm roofing costs by virtue of less nailing – Pack Quantity 50

Zinc plated insulation fixing for anchoring mineral wool and rigid insulation panels to masonry walls & concrete soffits. Galvanised Rendalath fixing - Pack sizes 20 bags & 400 boxes

Mechanical insulation anchor with plastic plug and glass filled nylon drive pin for fixing Kingspan & Celotex wall insulation. Use with load spreading washer for fixing mineral wool. Sizes: 70 - 180mm Long. Box Qty: 250

Hammer-in fixing with waterproof seal for use with air gap mesh membranes. Roughened head provides a key for plaster finishes. Bag quantity: 200

A flexible waterproofing rope for for sealing brick and plaster plugs when fixing waterproof tanking membrane systems to walls. Can be used as a tape. 5m x 10mm

This 2-part brick tie services the basement waterproofing industry. The fastener arrangement comprises a polypropylene plug fitted with a seal, and a stainless steel helical tie. Quantity: 50

Thin joint ties for use with Thermalite, Durox and Celcon Aircrete blockwork. Used in cavity construction to tie Aircrete masonry to brick facades. - Pack Quantity 50

Pack of 50 remedial wall ties for cavity tie installation and brick pinning. Superior Thor Helical ties offer the easiest, fastest and most reliable and versatile brick tie replacement system. Complies with BS EN 845-1: 2013 for UKCA and CE Marking.

Replacement wall tie kit for retying 20 square metres of brickwork, based on spacings of 2.5 ties per sqm. UKCA and CE Mark Approval to BS EN 845-1: 2013. Includes 50 ties, SDS tungsten carbide drill bit and SDS setting tool.

Cavity wall ties in a remedial kit. 150 helical wall ties with 2 drill bits and 1 fixing tool. This wall tie replacement kit has all you need for tying existing brick wall area of up to 60 sqm. Complies to EN845-1 for UKCA and CE Marking.

Helical wall ties in a 30 square metres kit, based on spacing’s of 2.5 ties per square metre. European CE Mark Approval to EN845-1:2013. Includes 75 brick ties, SDS drill bit and SDS drive tool

Retrofit lateral restraint tie for softwood. Ties a masonry wall to parallel floor joists in remedial applications. These stainless steel tie bars are suitable for use in solid or cavity walls. - Pack of 5

100 Replacement wall ties in a kit with a professional SDS insertion tool. These 9mm x 205mm helical ties are suitable for connecting masonry walls with a 25 to 45mm cavity in imperial brickwork or a 35 to 55mm cavity width in metric bricks and blocks

100 Replacement wall ties in a kit with a professional SDS insertion tool. These 9mm x 230mm helical ties are suitable for connecting masonry walls with a 50 to 70mm cavity in imperial brickwork or a 40 to 80mm cavity width in metric bricks and blocks

100 Replacement wall ties in a kit with a professional SDS insertion tool. These 9mm x 255mm helical ties are suitable for connecting masonry walls with a 75 to 95mm cavity in imperial brickwork or a 85 to 105mm cavity width in metric bricks and blocks

Masonry ties are 450mm long drive pins that corkscrew into brick, block, concrete and masonry when driven into a pilot bore. At least 10 times quicker than grout ties - Kit size:18 or 36 pins

Flexible timber frame ties with multiple drip points. These CE marked ties to connect a timber frame structure to a brick facade in new build. Also use for remedial retrofit applications. Pack of 250