Damp Check – Mesh Membrane Kit

Product code DAMPCHECK10
  • RRP £117.00
  • £126.00
  • £105.00
(170 items in stock)

The Twistfix Damp Check Kit contains everything needed to provide an effective moisture barrier when isolating damp walls from internal finishes. It is ideal for use after the insertion of a remedial damp course, for blocking damp penetration and installing wet rooms and showers.­ The durable damp-proof membrane incor­perates 3mm 'stand-off' studs on one side and a mesh face on the other for accepting dot and dab dry-lining, tile adhesive and cement renders.

The Damp Check kit comprises:

  • 1 x 10m x 1M  roll of air-gap tanking membrane having 3mm studs at 20mm centres
  • 1 x 10m roll butyl rubber water­pro­ofing tape
  • 100 x Hammer-in fixing plugs

The durable and flexible air-gap membrane is quick and easy to use, easily bent around corners and can be cut with a knife or scissors.

  • Hold tightly against the wall surface
  • Drill 8mm anchor holes and secure the membrane to the wall with hammer-in plugs
  • Seal joints with butyl rubber tape
  • Plaster, tile or dot and dab plasterboard sheets directly onto the mesh

The 10m Damp Check Kit provides a barrier against moisture and dampness. The air gap between studs to allow walls to breathe and water to drain behind the damp-proof membrane.

There are no reviews yet.

Write a review

    Overall satisfaction
    Value for money
    Ease of use

See also

4 items

Baseline Mesh Membrane Kit

Mesh membrane kit in 3 sizes with everything needed for water­pro­ofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plaster­board.
  • RRP £279.00
  • £213.48
  • £177.90
Rating 5.0 of 5

Damp Treatment – All Cure Total

A universal damp treatment kit for treating damp walls above ground level. This 3 in 1 damp treatment system will stop rising-damp block penetrating damp and combat conden­sation. The product will cover 10m of wall.
  • RRP £249.50
  • £214.56
  • £178.80
Rating 4.9 of 5

Tanking Membrane 20m

A cost effective high density polyethylene tanking membrane with 3mm studs formed on one face of the product and a mesh welded to the other side. Available at a special trade price in a 1m x 20m or 2m x 20m roll
  • RRP £129.50
  • £102.00
  • £85.00
Rating 5.0 of 5