Damp Proof Cream - Dampcure 1000 Kit
Damp proof cream in a builders injection kit with everything needed to provide a chemical damp-proof course for up to 80m of single leaf wall (sufficient cream for rising damp treatment to 40m of solid brick wall or both leafs of a cavity wall).
This simple and quick cream injection needs no specialist equipment. Non-hazardous ingredients migrate through the walls to form an effective damp proof course.
To damp proof a wall drill a series of 12mm holes, 90% though the wall at 100-120mm centres along the bed joint selected to receive the cream. Inject sufficient cream to fill the hole to within 1cm of wall surface and leave it to diffuse through the wall and cure to form a chemical damp proof course. Make good with sand and cement whist cream is in the hole or with mastic if filling after diffusion.
- 8 x 1000ml damp proof injection cream
- 4 x Plastic injection nozzles
- 1 x 12mm x 160mm Professional SDS drill bit
- 1 x 12mm x 260mm Professional SDS drill bit
- 1 x Large heavy duty caulking gun
- 1 x Pair of protective gloves
Consumption rate - 115mm wall* 10m per cartridge
Consumption rate - 230mm wall* 5m per cartridge
*Approximation only - allows 5-10% wastage
Solid walls can be drilled and injected from the most convenient side. The inner and outer skins of a cavity wall should be treated separately, drilling and injecting the cream from both sides of the wall to form a damp proof course in each. Renew damp plaster to complete the damp proofing treatment
Thank you, will use again and recommend
- RRP £556.50
- RRP £15.42