Helical wall ties in a 30 square metre kit, based on spacing’s of 2.5 ties per square metre. European CE Mark Approval to EN845-1:2013. Includes 75 brick ties, SDS drill bit and SDS drive tool

Easy to use DIY damp proofing kit. Includes everything you need to provide an effective damp proof course in walls. This kit treats up to 30m of single leaf walls or 15m of double leaf brickwork.

Water­pro­ofing membrane kit with everything needed for water­pro­ofing. Sizings 2 x 20m or 2 x 2.4m of floor or wall. Fix studs to basement membrane plugs for dry-lining walls. Lay screed direct.

Complete Masonry Brick Stitching Kit. Contains all products needed for high strength, masonry repairs to cracked brick, block or stone walls. Select 6mm, 7mm or 8mm helical bars. 10 bar kit

DPC cream in 380ml cartridges. Without the need of any specialist equipment the DPC cream will provide an effective barrier against rising damp in walls. The twelve cartridges will treat 22.8 lm of double leaf brickwork.

Mesh membrane kit in 3 sizes with everything needed for water­pro­ofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plaster­board. 2.20m or 2.10m sizings

Helical bars in a kit for retrofit masonry rein­for­cement. High tensile 6mm x 7mm reinforcing bars, grout and fixing kit for structural repairs or for forming window-spanning brick beam lintels

Rising damp injection cream in a builders refill pack. A low cost and low waste damp course cream package supplied in a 8 litre refill pack for damp proof contractors. This box treats up to 40m of double leaf wall

Damp Check Kit provides an effective moisture barrier when isolating damp walls from internal finishes. The air gap behind the damp-proof membrane allows walls to breathe and water to drain. 10m Kit

Helical ties in a 20 square metres kit, based on spacing’s of 2.5 ties per m2. European CE Mark Approval to EN845-1:2013. Includes 50 ties, SDS tungsten carbide drill bit and SDS setting tool

DPC kit for Builders. This 24 Litre DPC injection pack contains the products needed to provide a chemical DPC to stop rising damp in walls. This kit treats up to 120m of double leaf / cavity wall

A cost effective high density polyethylene tanking membrane with 3mm studs formed on one face of the product and a mesh welded to the other side. Available at a special trade price in a 1m x 20m or 2m x 20m roll