DPC Cream 24L Kit
A professional damp proofing kit with sufficient DPC injection treatment for up to 120 LM of nine inch solid wall or both leafs of a cavity wall.
Damp-Cure cream, which is a 100% effective injection treatment formulated to ensure rapid and maximum penetration into damp walls.
The injection cream has been independently tested by the British Board of Agrement and given its own certification number 13/5023.
Solid walls can be drilled and injected from the most convenient side. The inner and outer skins of a cavity wall should be treated independently of each other, drilling and injecting the both sides of the wall to form a chemical DPC in each. Renew damp plaster to complete the damp proofing treatment.
Drill a series of 12mm holes, 90% though the wall at 100-120mm centres along the designated bed joint. Inject enough cream to fill the hole to within 1cm of wall surface and leave it to migrate through the wall and cure to form a chemical damp proof course. Make good with sand and cement whist cream is in the hole or with mastic if filling after diffusion
Damp Injection Kit includes:
- 3x 8 ltr Damp-Cure DPC cream
- 1 x Pump-up pressure vessel and injection nozzle
Consumption rate - 230mm wall* 40m per Box
*Approximation only - allows 5-10% wastage
There are no reviews yet.