Twistfix products

Mesh membrane kit in 3 sizes with everything needed for waterproofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plasterboard. 2.20m or 2.10m sizings

Cavity-drain membrane with 20mm studs for use on cellar floors with 20mm studs. A membrane with high cavity drain capacity. Ideal for basement waterproofing leaving ready for flooring. Roll sizes: 2 x 10m or 2 x 20m

Basement membrane for tanking walls and floors in basement waterproofing schemes. Cavity drain membranes are available in 40m2 and 48m2 rolls for cost effective basement waterproofing. Multi-Pack: 6 rolls. Sizings: 2 x 20m or 2 x 2.4m.

A high quality waterproofing tape that is applied to the lap joints of abutting cavity-drain membranes. This flexible butyl rubber tape forms a water-tight joint seal. 22.5m x 28mm

A flexible waterproofing rope for for sealing brick and plaster plugs when fixing waterproof tanking membrane systems to walls. Can be used as a tape. 5m x 10mm

A wide flexible membrane tape for sealing and waterproofing the wall-floor junction of cavity drain membrane systems. This 150mm wide waterproofing tape is available in 20m rolls

A single sided overseal tape used to seal over the top of lapping membranes. It serves as a vapour barrier and a waterproof seal on externally taped joints 20m x 75mm

A waterproof fibre faced sealing tape for butt joining mesh-faced damp proofing membrane. The fibre tape takes traditional renders and dot and dab adhesives. 20m x 100mm

A lightweight renovating plaster pre-mix with perlite, fibres & water repellent additives. For use following damp proof treatments or in conjunction with cementitious tanking coatings. 20KG

Universal mortar is fibre reinforced. It cures rapidly to produce a high performance levelling coat, cementitious render and profiling mortar. Sold in 25kg bags.

Wykamol tanking slurry is a cementitious water-proofer for internal walls of brick, block or stone. It complies with BS 8102 for Type-A barrier protection. 20kg Bag.

Hydraflex is a two component flexible coating , it can be applied to mineral substrates such as Concrete and Masonry to provide a waterproof barrier.

Damp Resistant Renovation Plaster is used as part of our damp-proofing systems for replastering after a DPC, using products such as Ultracure. Ideal for areas which are prone to condensation, such as kitchens and bathrooms.

Universal mortar is fibre reinforced. It cures rapidly to produce a high performance levelling coat, cementitious render and profiling mortar. Sold in 25kg bags.

Wykamol tanking slurry is a cementitious water-proofer for internal walls of brick, block or stone. It complies with BS 8102 for Type-A barrier protection. 20kg Bag.

Waterguard drainage channels effectively divert groundwater from basement walls and floors. Each 2 m channel features perforated sides and an integrated upstand for reliable drainage.

Supplied as a ready-to-install kit with pump, non-return valve, and high-level alarm for added protection. 132l per min

The Pro Sump Kit is a versatile and high-performance basement drainage solution, designed to keep your basement dry and protected from water ingress.

The Pro Sump Kit is a versatile and high-performance basement drainage solution, designed to keep your basement dry and protected from water ingress.

Baseline Drain Corner for connecting two pieces of perimeter or central drainage channels in the corner of basement rooms.

Wykamol Drain Outlet is used to take water from the drainage channel through an external wall where natural gravity drainage is available.

Baseline T connector is used for changing the direction of a primeter drainage run.

Waterguard Drain End for use with perimeter and central drainage , it clips to the end of the drainage channel forming a stop end.

Waterguard Drain Jetting Eye runs in line with perimeter or central drainage to enable the drainage to be flushed out when carrying out regular cleaning against the build up of debris.