Baseline T connector is used for changing the direction of a primeter drainage run.

Waterguard Drain End for use with perimeter and central drainage , it clips to the end of the drainage channel forming a stop end.

Waterguard Drain Jetting Eye runs in line with perimeter or central drainage to enable the drainage to be flushed out when carrying out regular cleaning against the build up of debris.

Baseline Drainage connector for joining lengths of perimeter and central drainage channels together.

Supplied as a ready-to-install kit with pump, non-return valve, and high-level alarm for added protection. 132l per min

The SumpFlo Kit is a versatile and high-performance basement drainage solution, designed to keep your basement dry and protected from water ingress.

Double-layered waterproof cavity drain membrane for foundation waterproofing in new-build applications. High density polyethylene membrane bonded to a geotextile mat. Roll size 2m x 20m (40m2)

General-purpose, quick drying damp proof paint that dries to form a water-proof membrane. An effective penetrating damp treatment for waterproofing wall surfaces. 5L

Dry Seal masonry water repellent is a high strength silane cream treatment that waterproofs brick and stone facades including walls, bridges and tunnels. 3kg Tub

Water repellent surface treatment for wall suffering from penetrating damp. Prevents moisture migrating through masonry walls and brickwork facades. Costs much less than weather resistant render products. 5 Litres

Water repellent surface treatment for protection against penetrating damp. Prevents water migrating through brick and masonry façade walls. Costs much less than storm-proof render products. 25L

This 2-part brick tie services the basement waterproofing industry. The fastener arrangement comprises a polypropylene plug fitted with a seal, and a stainless steel helical tie. Quantity: 50

Hammer-in fixing with waterproof seal for use with air gap mesh membranes. Roughened head provides a key for plaster finishes. Bag quantity: 200

Hammer-in fixing for use with Baseline Mesh waterproofing membrane. Keyed surface to receive direct application of wall plaster or plasterboard on adhesive dabs. - Box Quantity: 200

Hammer-in fixing with waterproof seal for use with Baseline 8 & Thermseal waterproofing membranes. Screw wall studs directly into aperture located in plug head. Quantity: Box of 200