Hammer-in fixing with waterproof seal for use with Baseline 8 & Thermseal waterproofing membranes. Screw wall studs directly into aperture located in plug head. Quantity: Box of 200

A high quality waterproofing tape that is applied to the lap joints of abutting cavity-drain membranes. This flexible butyl rubber tape forms a water-tight joint seal. 22.5m x 28mm

Hammer-in fixing with waterproof seal for use with air gap mesh membranes. Roughened head provides a key for plaster finishes. Bag quantity: 200

A wide flexible membrane tape for sealing and waterproofing the wall-floor junction of cavity drain membrane systems. This 150mm wide waterproofing tape is available in 20m rolls

A single sided overseal tape used to seal over the top of lapping membranes. It serves as a vapour barrier and a waterproof seal on externally taped joints 22.5m x 75mm

Hydraplug waterproofing putty is a quick setting cementitious compound. It is mixed with water and applied as a putty to plug and stop active water leaks. 5kg

Basement membrane for tanking walls and floors in basement waterproofing schemes. Cavity drain membranes are available in 40m2 and 48m2 rolls for cost effective basement waterproofing. Multi-Pack: 6 rolls. Sizings: 2 x 20m or 2 x 2.4m.

Wykamol CM 20 mm Hi-Viz cavity drain membrane for waterproofing basement floors. 40 sqm high-visibility yellow tanking membranes are in stock and sold in at trade prices. 2 x 20 m.

Damp Check Kit provides an effective moisture barrier when isolating damp walls from internal finishes. The air gap behind the damp-proof membrane allows walls to breathe and water to drain. 10m Kit

Mesh-faced membrane with 3mm studs and a polypropylene mesh to provide a key for plaster, render or plasterboard dry lining on plaster dabs. Roll sizes: 10m2, 20m2 and 40m2

CM8 is a versatile 8mm high tanking membrane for use in waterproofing damp proofing applications above and below ground level. Options: Rolls of 40m2 and 48m2

CM8-Mesh Membrane withf 8mm studs and polypropylene mesh key for direct application of plaster, render or adhesive dabs for plasterboard dry lining. Rolls sizes: 20m2 and 40m2

Waterproofing membrane kit with everything needed for waterproofing. Sizings 2 x 20m or 2 x 2.4m of floor or wall. Fix studs to basement membrane plugs for dry-lining walls. Lay screed direct.

Mesh membrane kit in 3 sizes with everything needed for waterproofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plasterboard. 2.20m or 2.10m sizings

Wykamol CM20 drainage membrane with 20mm studs. It has been developed for use in waterproofing basement and cellar floors. Options 20m2 and 40m2

Wykamol CM3 damp proofing membrane with 3mm studs; ideal for the isolation of internal surfaces from damp walls and floors. Roll Size: 2m x 20m (40m2)

A flexible waterproofing rope for for sealing brick and plaster plugs when fixing waterproof tanking membrane systems to walls. Can be used as a tape. 5m x 10mm

A waterproof fibre faced sealing tape for butt joining mesh-faced damp proofing membrane. The fibre tape takes traditional renders and dot and dab adhesives. 25m x 115mm

Waterguard drainage channels effectively divert groundwater from basement walls and floors. Each 2 m channel features perforated sides and an integrated upstand for reliable drainage. Sold exclusively in a convenient 10-pack—ideal for basement waterproofi

Ama-Drainer series is part of KSB's latest generation of submersible sump pumps. They have a pumping capacity of 130-240 litres per minute and a 7-12m head, handling waste water with dirt particles up to a particle size of 10mm

Baseline Drain Corner for connecting two pieces of perimeter or central drainage channels in the corner of basement rooms.

Wykamol Drain Outlet is used to take water from the drainage channel through an external wall where natural gravity drainage is available.

Baseline T connector is used for changing the direction of a primeter drainage run.

Baseline Drain End for use with perimeter and central drainage , it clips to the end of the drainage channel forming a stop end.