Damp Check Kit provides an effective moisture barrier when isolating damp walls from internal finishes. The air gap behind the damp-proof membrane allows walls to breathe and water to drain. 10m Kit

Mesh-faced membrane with 3mm studs and a polypropylene mesh to provide a key for plaster, render or plasterboard dry lining on plaster dabs. Roll sizes: 10m2, 20m2 and 40m2

CM8 is a versatile 8mm high tanking membrane for use in waterproofing damp proofing applications above and below ground level. Options: Rolls of 40m2 and 48m2

CM8-Mesh Membrane withf 8mm studs and polypropylene mesh key for direct application of plaster, render or adhesive dabs for plasterboard dry lining. Rolls sizes: 20m2 and 40m2

Waterproofing membrane kit with everything needed for waterproofing. Sizings 2 x 20m or 2 x 2.4m of floor or wall. Fix studs to basement membrane plugs for dry-lining walls. Lay screed direct.

Mesh membrane kit in 3 sizes with everything needed for waterproofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plasterboard. 2.20m or 2.10m sizings

Ultracure DPC cream in 380ml cartridges. Treat damp walls with advanced chemical damp proof course products. No specialist equipment needed. Simple DPC injection treatment using caulking gun.

Ultracure DPC cream in 1ltr cartridges. For the treatment of rising damp in both solid and cavity walls. No specialist equipment needed. Simple DPC injection treatment using a 1ltr caulking gun.

Ultracure Damp Proof Injection cream in a 3 litre tubl for the treatment of damp walls. Advanced chemical damp course injection applied via a low pressure pump and nozzle. This tub treats up to 15m of double leaf wall.

Easy to use DIY damp proofing kit. Includes everything you need to provide an effective damp proof course in walls. This kit treats up to 30m of single leaf walls or 15m of double leaf brickwork.

A universal damp treatment kit for treating damp walls above ground level. This 3 in 1 damp treatment system will stop rising-damp block penetrating damp and combat condensation. The product will cover 10m of wall.

Damp Proofing Cream sold as a 3 x 380ml pack for the treatment of rising damp. Using a standard caulking gun to inject the cream into the wall the cream will provide an effective barrier against rising damp in walls.

Ultracure DPC cream in 6 x 380ml cartridges. Treat damp walls with advanced chemical damp proof course products. No specialist equipment needed. Simple DPC injection treatment using caulking gun.

Damp proof cream kit for Builders. This 8Litre DPC injection pack contains the products needed to provide a chemical DPC to stop rising damp in walls. This kit treats up to40m of double leaf / cavity wall

DPC cream in 380ml cartridges. Without the need of any specialist equipment the DPC cream will provide an effective barrier against rising damp in walls. The twelve cartridges will treat 22.8 lm of double leaf brickwork.

Rising damp injection cream in 4 x 1 ltr cartridges. Inject into the mortar bed using a large caulking gun to form a Chemical DPC. The four cartridges will treat 20m of double leaf walls.

Damp Proofing Cream sold as a 6 x 1 litre pack for the treatment of damp walls. Using a large caulking gun to inject the cream into the wall the cream will provide an effective barrier against rising damp in walls.

A chemical damp proofing injection cream in 8 x 1LTR cartridges Inject into a series of holes along the mortar bed to stop rising damp using a large caulking gun. The 8 cartridges will treat 40m of a 230mm wall.