ISO-THERM is an ultra thin specially woven polyester based thermal wall insulation , it is flexible and lightweight and will accommodate a plaster skim finish.

Heat recovery fans control humidity levels and reduce the likelihood of condensation. This heat exchange ventilation unit provides a continuous air change with minimum heat loss

Heat recovery units in a multi-buy pack of 4. These humidity control heat exchange fans reduce relative humidity and alleviate condensation, providing continuous ventilation with minimum heat loss.

Hammer-in fixing with waterproof seal for use with air gap mesh membranes. Roughened head provides a key for plaster finishes. Bag quantity: 200

Hammer-in fixing for use with Baseline Mesh waterproofing membrane. Keyed surface to receive direct application of wall plaster or plasterboard on adhesive dabs. - Box Quantity: 200

Twistfix Twist Nails are zinc-plated, helical nails ideal for fixing timber battens to masonry walls. Easy to install without pilot holes in lightweight blocks, they provide strong, reliable fastening for dry-lining and other timber applications.

Hammer-in fixing with waterproof seal for use with Baseline 8 & Thermseal waterproofing membranes. Screw wall studs directly into aperture located in plug head. Quantity: Box of 200

Metal insulation fixings for anchoring Rockwool & Knauff fireproof insulation panels to masonry walls & concrete soffits. Corrosion resistant Stainless Steel Rendalath fixing - Pack sizes 20 & 400

Galvanised helical warm roof nails for secure fixing of Kingspan 6mm ply-faced insulation boards to joists or rafters. Durable hammer-in fixings for flat warm roof applications, suitable for 40–185mm boards. Available in packs of 20 or a 400 box

Fixings for securing insulated plasterboard sheets to brick and block walls. Fire proof fasteners with galvanized coating for internal solid wall insulation in packs of 20 or boxes of 400

Insulation fasteners for fixing ply-faced Celotex or Kingspan decking boards. Hammer in fixings for flat warm roof deck insulation upto 210mm deep. Rust resistant Stainless Steel - 20 Pk or 400 Box

Superior warm roof nails for fixing Kingspan or Celotex insulation between counter-batten & rafter. Powerful Super-7 fixings reduce warm roofing costs by virtue of less nailing – Pack Quantity 50

Zinc plated insulation fixing for anchoring mineral wool and rigid insulation panels to masonry walls & concrete soffits. Galvanised Rendalath fixing - Pack sizes 20 bags & 400 boxes

Mechanical insulation anchor with plastic plug and glass filled nylon drive pin for fixing Kingspan & Celotex wall insulation. Use with load spreading washer for fixing mineral wool. Sizes: 70 - 180mm Long. Box Qty: 250

Lightweight helical wires. 5mm x 7m stainless steel helical reinforcement bars are ideal for use in existing buildings with narrow mortar joints having a height as little as 7mm. Pack of 5

These heavy duty helical bars are ideal for bed-joint reinforcement applications for use where additional sheer strength is needed. Pack of 5

A warm roofing guide tool with double-ledge gutter. Squares & aligns Super-7 warm roof fixings vertically upon counter batten widths of 37 & 50mm to guard against deficiencies in-skew fixing.

High-thrust pointing and grouting gun with trigger mechanism for smooth application

Pinning nozzle and collet set for masonry repairs. Fits mortar injection gun to facilitate repairs of wall cracks. Use to install helical bars for brick stitching by tying separating cross walls

This heavy-duty caulking gun is purpose-built for applying damp proofing cream, delivering quick, accurate, and mess-free treatment against rising damp. Designed to fit 300ml to 400ml cartridges, it ensures reliable performance on professional and DIY pro

SDS adapter for fixing 5mm helical wall ties during the construction of timber frame houses. Insert the tie into the tool and hammer 35mm into timber stud using the hammer-only action

SDS adapter for fixing 7mm helical wall ties into thin joint blockwork. Set drill to hammer action only, insert tie into tool and hammer the tie 85mm into Thermalite, Celcon or Durox blocks.

SDS adapter for fastening 12mm diameter retro-fit wall connectors. The innovative tool design allows it to spin around the red end of the connecting device to deliver a repetitive impacts rapid installation

The setting tool is used in conjunction with Mechanical ties. The tool is located over the brass ‘torque’ nut and tightened for the product to work correctly.