No More Damp EP40 Epoxy Floor Coating System
No More Damp EP40 floor coating system is a water based two part system consisting of an Epoxy Primer and a Epoxy Finish coat in Grey or Clear.
The primer is designed to soak into the substrate , block the pores and improve adhesion to the substrate. The finish coat is then applied to the floor leaving a clean hardwearing , dust free , waterproof finish.
** Please note EP40 Primer should always be applied prior to the application of either the Grey or Clear finish coat **
Over concrete floors in a variety of enviroments such as :
Industrial Plants , Commercial and retail stores , Warehouses , Hospitals , Showrooms , Garages , Gymnasiums and Food preperation areas.
Can be applied to Green concrete after 7 days.
Ideal for areas in contact with vehicles such as Forklifts and Lorries.
Can be used as a Liquid DPM at ground level.
Can be used Internally .
Primer and Finish coats are sold in 5kg containers.
Coverage 5KG = up to 40m2.( depending on substrate porosity and roughness )
Please refer to Technical Data sheet for all other information.
There are no reviews yet.
- RRP £88.20