Hammer-in fixing for use with Baseline Mesh waterproofing membrane. Keyed surface to receive direct application of wall plaster or plasterboard on adhesive dabs. - Box Quantity: 200

Pack of 50 remedial wall ties for cavity tie installation and brick pinning. Superior Thor Helical ties offer the easiest, fastest and most reliable and versatile brick tie replacement system. Complies with BS EN 845-1: 2013 for UKCA and CE Marking.

This SDS drive adapter is only for fixing Thor Helical CD remedial wall ties. The patented tool spins around the tie’s shank. It delivers repetitive hammer blows for high-speed installation.

Replacement wall tie kit for retying 20 square metres of brickwork, based on spacings of 2.5 ties per sqm. UKCA and CE Mark Approval to BS EN 845-1: 2013. Includes 50 ties, SDS tungsten carbide drill bit and SDS setting tool.

150 x Thor Helical Remedial Wall ties in a complete kit for wall tie replacement. Complies to EN845-1 for UKCA and CE Marking.

Quick-fix stainless steel remedial ties with mechanically expanding Neoprene sleeves. Use for cavity tie replacement work in brick masonry or concrete walls. Box of 100

Flexible timber frame ties with multiple drip points. These CE marked ties to connect a timber frame structure to a brick facade in new build. Also use for remedial retrofit applications. Pack of 250

Masonry ties are 450mm long drive pins that corkscrew into brick, block, concrete and masonry when driven into a pilot bore. At least 10 times quicker than grout ties - Kit size:18 or 36 pins

Helical tie bars for connecting multiple layers of brick or stone when reinforcing the separating leaves of a solid wall without the need for special grouts or mortars. Packed in lots of 50

TFIX Render Pin is a dry mechanical render fixing system designed to stabilise loose, cracked or separated render without removal. Manufactured from Grade 304 or 316 stainless steel, it provides a fast, cost-effective and non-disruptive solution for rende

Retrofit lateral restraint tie for softwood. Ties a masonry wall to parallel floor joists in remedial applications. These stainless steel tie bars are suitable for use in solid or cavity walls. - Pack of 5

Flexible 5mm diameter stainless steel remedial cavity brick ties. Helical flutes offer superior keying when resin grouted in masonry wall tie replacement schemes. - Pack Quantity 250

Structural repair ties are extra long 12 mm diameter drive-in helical wall ties that reinforce vulnerable masonry walls. Lengths 910 mm (36") to 1670 mm (66") in 150 mm (6") increments. Pack of 10.

Twistfix Twist Nails are zinc-plated, helical nails ideal for fixing timber battens to masonry walls. Easy to install without pilot holes in lightweight blocks, they provide strong, reliable fastening for dry-lining and other timber applications.

Hammer-in fixing with waterproof seal for use with Baseline 8 & Thermseal waterproofing membranes. Screw wall studs directly into aperture located in plug head. Quantity: Box of 200

Metal insulation fixings for anchoring Rockwool & Knauff fireproof insulation panels to masonry walls & concrete soffits. Corrosion resistant Stainless Steel Rendalath fixing - Pack sizes 20 & 400

Galvanised helical warm roof nails for secure fixing of Kingspan 6mm ply-faced insulation boards to joists or rafters. Durable hammer-in fixings for flat warm roof applications, suitable for 40–185mm boards. Available in packs of 20 or a 400 box

Fixings for securing insulated plasterboard sheets to brick and block walls. Fire proof fasteners with galvanized coating for internal solid wall insulation in packs of 20 or boxes of 400

Insulation fasteners for fixing ply-faced Celotex or Kingspan decking boards. Hammer in fixings for flat warm roof deck insulation upto 210mm deep. Rust resistant Stainless Steel - 20 Pk or 400 Box

Stainless steel helical warm roof fixings designed to secure counterbattens through rigid insulation into timber rafters without compressing the insulation layer. Suitable for Celotex, Kingspan and PIR insulation boards in pitched warm roof construction.

Zinc plated insulation fixing for anchoring mineral wool and rigid insulation panels to masonry walls & concrete soffits. Galvanised Rendalath fixing - Pack sizes 20 bags & 400 boxes

Mechanical insulation anchor with plastic plug and glass filled nylon drive pin for fixing Kingspan & Celotex wall insulation. Use with load spreading washer for fixing mineral wool. Sizes: 70 - 180mm Long. Box Qty: 250

Hammer-in fixing with waterproof seal for use with air gap mesh membranes. Roughened head provides a key for plaster finishes. Bag quantity: 200

A flexible waterproofing rope for for sealing brick and plaster plugs when fixing waterproof tanking membrane systems to walls. Can be used as a tape. 5m x 10mm