Search

Waterproofing membrane kit with everything needed for waterproofing. Sizings 2 x 20m or 2 x 2.4m of floor or wall. Fix studs to basement membrane plugs for dry-lining walls. Lay screed direct.

Mesh membrane kit in 3 sizes with everything needed for waterproofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plasterboard. 2.20m or 2.10m sizings

Cavity-drain membrane with 20mm studs for use on cellar floors with 20mm studs. A membrane with high cavity drain capacity. Ideal for basement waterproofing leaving ready for flooring. Roll sizes: 2 x 10m or 2 x 20m

Basement membrane for tanking walls and floors in basement waterproofing schemes. Cavity drain membranes are available in 40m2 and 48m2 rolls for cost effective basement waterproofing. Multi-Pack: 6 rolls. Sizings: 2 x 20m or 2 x 2.4m.

Wykamol tanking slurry is a cementitious water-proofer for internal walls of brick, block or stone. It complies with BS 8102 for Type-A barrier protection. 20kg Bag.

Wykamol tanking slurry is a cementitious water-proofer for internal walls of brick, block or stone. It complies with BS 8102 for Type-A barrier protection. 20kg Bag.

Wykamol Drain Outlet is used to take water from the drainage channel through an external wall where natural gravity drainage is available.

Ultracure DPC cream in 1ltr cartridges. For the treatment of rising damp in both solid and cavity walls. No specialist equipment needed. Simple DPC injection treatment using a 1ltr caulking gun.

Wykamol Ultracure 5L is a BBA-certified damp proofing cream for rising damp treatment. Easy to apply, it forms a durable chemical damp proof course in masonry walls, protecting against moisture with a 100% active silicone formula.

CM8 is a versatile 8mm high tanking membrane for use in waterproofing damp proofing applications above and below ground level. Options: Rolls of 40m2 and 48m2

CM8-Mesh Membrane withf 8mm studs and polypropylene mesh key for direct application of plaster, render or adhesive dabs for plasterboard dry lining. Rolls sizes: 20m2 and 40m2

A lightweight renovating plaster pre-mix with perlite, fibres & water repellent additives. For use following damp proof treatments or in conjunction with cementitious tanking coatings. 20KG

General-purpose, quick drying damp proof paint that dries to form a water-proof membrane. An effective penetrating damp treatment for waterproofing wall surfaces. 5L

Supplied as a ready-to-install kit with pump, non-return valve, and high-level alarm for added protection. 132l per min

A flexible waterproofing rope for for sealing brick and plaster plugs when fixing waterproof tanking membrane systems to walls. Can be used as a tape. 5m x 10mm

Water repellent surface treatment for wall suffering from penetrating damp. Prevents moisture migrating through masonry walls and brickwork facades. Costs much less than weather resistant render products. 5 Litres

Waterguard drainage channels effectively divert groundwater from basement walls and floors. Each 2 m channel features perforated sides and an integrated upstand for reliable drainage.

Damp Resistant Renovation Plaster is used as part of our damp-proofing systems for replastering after a DPC, using products such as Ultracure. Ideal for areas which are prone to condensation, such as kitchens and bathrooms.

Dry Seal masonry water repellent is a high strength silane cream treatment that waterproofs brick and stone facades including walls, bridges and tunnels. 3kg Tub

Ultracure DPC cream in 380ml cartridges. Treat damp walls with advanced chemical damp proof course products. No specialist equipment needed. Simple DPC injection treatment using caulking gun.

A high quality waterproofing tape that is applied to the lap joints of abutting cavity-drain membranes. This flexible butyl rubber tape forms a water-tight joint seal. 22.5m x 28mm

Rising damp injection cream in a builders refill pack. A low cost and low waste damp course cream package supplied in a 8 litre refill pack for damp proof contractors. This box treats up to 40m of double leaf wall

Double-layered waterproof cavity drain membrane for foundation waterproofing in new-build applications. High density polyethylene membrane bonded to a geotextile mat. Roll size 2m x 20m (40m2)

A wide flexible membrane tape for sealing and waterproofing the wall-floor junction of cavity drain membrane systems. This 150mm wide waterproofing tape is available in 20m rolls